Showroom Reveal Cover Measuring Instructions
How to Measure for Your Showroom Reveal Cover
For the best presentation, we recommend taking two simple measurements before ordering your reveal cover.
These measurements follow the contour of the vehicle, rather than measuring in a straight line.
1. Measure Front to Back
Use a long piece of string and start at the ground near the front bumper.
Run the string up and over the vehicle, following its contours, then continue down to the ground near the rear bumper.
Lay the string flat and measure its total length with a tape measure.
This is your front-to-back measurement.
2. Measure Side to Side
Repeat the same process across the width of the vehicle.
Start at the ground on one side, run the string over the roof while following the vehicle's contour, then continue down to the ground on the opposite side.
Lay the string flat and measure its total length.
This is your side-to-side measurement.
Choose Your Reveal Cover Size
Once you have both measurements, compare them with the reveal cover sizes below.
Remember that some customers prefer more fabric reaching the floor for a fuller, more dramatic presentation, so the ideal size may depend on the look you want to achieve.
| Size | Metric | Imperial |
|---|---|---|
| Small | 500 cm × 425 cm | 197 in × 167 in |
| Medium | 600 cm × 450 cm | 236 in × 177 in |
| Large | 700 cm × 475 cm | 275 in × 187 in |
| XL | 800 cm × 500 cm | 315 in × 197 in |
| 2XL | 900 cm × 600 cm | 354 in × 236 in |
Still Unsure Which Size to Choose?
Our general fit chart below can help as a starting point, but measuring your vehicle is the best way to choose the right cover.
If you're working to a deadline or would like help choosing the best size, please contact us before ordering. We'll be happy to help.